Blendtec Brains Betriebsanleitung PDF herunterladen (Seite 10)

Page 14

6.2 SERVICE PROCEDURE

Should you experience any difculty in using your Blendtec blender,

please do the following:

UNDER WARRANTY

1. Contact your authorized Blendtec service agent immediately to

diagnose the difculty. Please have your serial number ready as well

as a description of the problem. Do not attempt to do your own repairs.

Repairs made by persons other than Blendtec authorized service

representatives will void the warranty. Many issues can be resolved

simply and quickly over the phone.

2. If the difculty cannot be resolved over the phone, your unit may

require replacement. If you are under warranty, Blendtec will repair

or replace your unit at no cost. Cosmetic damage and abuse are not

included.

OUT OF WARRANTY

1. Contact your Blendtec service agent to diagnose the difculty. Please

have your serial number ready along with a description of the problem.

Many issues can be resolved simply and quickly over the phone.

Attempting to do your own repairs will void the warranty of your

machine.

2. If you are not under warranty and wish to have your unit repaired, box

up your existing unit and ship the unit to your authorized Blendtec service

agent. Your Blendtec service agent will bill you for services rendered.

When shipping your blender unit to the service agent (either in warranty

or out of warranty), Please include the following:

Name:

Company: Store Number:

Address:

Phone:

Serial Number:

(Found on the underside of the motor)

Cycle Count:

(Number on the LCD Screen)

Purchase Date: Place of Purchase:

Problem Description:

APPENDIX A: ABC BLENDER OPERATION

A1: Operation

The ABC models features an interlock safety switch that prevents the unit

from operating unless the polycarbonate sound enclosure is completely

shut. To operate the ABC, press the desired button. A red LED will light

up above the button selected and will remain lit until another button is

selected or the button is touched a second time during operation. The

machine will start the blending cycle once the sound enclosure lid has

been closed. Touching any button during the motor operation will stop

the blender and de-select the button. Touch the “P” (Pulse) button when

the sound enclosure lid is open will deselect all programs. The lid can

then be closed without starting a cycle.

A2: Interlock Modes

● Automatic Interlock Mode: Equipment is shipped with this selection

installed. In this mode the motor will not operate unless the sound

enclosure lid is closed. The selected program (as indicated by the

lighted program button on the touchpad) will start automatically each

time the sound enclosure is closed unless the lighted button is pushed

again to de-select the program. To restore this interlock mode from

either Safety or Manual mode, press the “P – 1 – 3” buttons in quick

succession.

● Safety Mode: In this mode, the motor will not operate unless the

sound enclosure is closed. The motor will not automatically start when

the enclosure is closed. A button must be pushed each time the operator

wishes to start a drink cycle. To select this mode from Automatic

Interlock or Manual mode, press

“5 – 1 – 3” in quick succession.

● Manual Mode: In this mode, the safety interlock is disabled and the

blender motor will start any time a button is pressed. To select this mode

from Automatic Interlock or Safety mode, press the “4 – 1 – 3” buttons in

quick succession.

Page A-I

1 2 ... 5 6 7 8 9 10 11 12 13 14 15

Kommentare zu diesen Handbüchern

Keine Kommentare

Blendtec Brains Betriebsanleitung Seite 10

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Mixer Blendtec Brains